Hi,

After installing codoforum and attempting to upload some files, I noticed that regardless of the file size limit set, the files that are around 8MB or above would fail to upload without error message from the forum.

When I attempt to upload these files, after the selecting the files and clicking upload, the green bar will and the checkmark will show up, but the window for file upload will not close and the link to the file won't be present in the textbox.

When I check the attachment directory, the file I tried to upload is not there. The following error shows up when I open the console on the browser.

Would like to know what could be done to resolve this issue. Thanks.

Hi, I installed FreiChat on a HumHub site. It worked fine until a CroneJobs issue. After that the chat bubble doesn't appeared any more (I assume the problem started after that). I have unistalled and re installed many times the chat module, and even have deleted the site account on the dashboard of FreiChat, and the chat continues without appears.v

I can't figure out why today the mobile menu is showing on my forms desktop site on the left hand side. there has been no changes or anything. Just started happening.

Hi everyone, I'm planning to launch a Q&A style forum for my community. Our typical make or buy question started with research which is why I stumbled upon this product & community.

Been reading the documentation but couldn't find exactly what I was looking for. Basically wanna know whether codoforum would offer / support following use cases:

1. Approved signups: as admin, I want to review and approve all user signups (gated community).
2. Upvoting: as user, I want to upvote posts. I saw that upvoting replies is possible, but can I upvote a post as well?
3. Groups: Besides choosing a category for my post - is it possible to create groups?
4. Social sharing: Is there any feature that allows me to share a specific post via SM, e.g. twitter ?

TIA for all upcoming replies, much appreciated!

Hello.
I do:

1. Download zip of codoforum 5.2.1
2. Upload to server and unzip
3. Setting up Nginx. I give to codoforum php-fpm 8.2.
4. Then i'm install from browser this engine.

In result i got PHP errors.

Deprecated: Creation of dynamic property CODOF\Asset\Stream::$parser is deprecated in /home/site/hub/sys/CODOF/Asset/Stream.php on line 98
Deprecated: Creation of dynamic property CODOF\Plugin::$db is deprecated in /home/site/hub/sys/CODOF/Plugin.php on line 16
Deprecated: Creation of dynamic property CODOF\Smarty\Single::$parent is deprecated in /home/site/hub/sys/CODOF/Smarty/Single.php on line 19
Deprecated: Creation of dynamic property CODOF\User\RememberMe::$db is deprecated in /home/site/hub/sys/CODOF/User/RememberMe.php on line 13
Deprecated: mb_convert_encoding(): Handling HTML entities via mbstring is deprecated; use htmlspecialchars, htmlentities, or mb_encode_numericentity/mb_decode_numericentity instead in /home/site/hub/sys/CODOF/Format.php on line 26
Deprecated: Creation of dynamic property Controller\forum::$view is deprecated in /home/site/hub/sys/Controller/forum.php on line 383
Deprecated: Creation of dynamic property CODOF\Asset\Stream::$parser is deprecated in /home/site/hub/sys/CODOF/Asset/Stream.php on line 98
Deprecated: Creation of dynamic property CODOF\Asset\Stream::$parser is deprecated in /home/site/hub/sys/CODOF/Asset/Stream.php on line 98
Deprecated: Creation of dynamic property CODOF\Asset\Stream::$prependURL is deprecated in /home/site/hub/sys/CODOF/Asset/Stream.php on line 166
Deprecated: Creation of dynamic property Smarty_Internal_Template::$compiled is deprecated in /home/site/hub/sys/vendor/smarty/smarty/libs/sysplugins/smarty_internal_template.php on line 719
Deprecated: Creation of dynamic property Smarty_Internal_Template::$compiled is deprecated in /home/site/hub/sys/vendor/smarty/smarty/libs/sysplugins/smarty_internal_template.php on line 719

Then i tried to give him php 5.6 and 7.4. Errors not gone.
Then i give him back 8.2.
I use CloudFlare with Auto Minify, Brotli and Early Hints.
In my example on my site, Codoforum loose all CSS tamplates.

Link to my site (NO SPAM, NO AD) (It's just for get more info about a problem)
or1k.net/hub

@admin

Hello Codoforum community. It's I!

Just kidding. But no, really.

I've noticed a issue with my Codoforum installation of recent with emails.

Some emails are not being pushes threw of recent, or sending to many times.

As an example, a user who has "daily digest" will receive the daily digest around 10-15 times per day.

Or when someone responds to a forum post they have it set to notify them of, it just won't send anything.

@Admin has logged in again. Is this a ray of hope in Codologic?.. 👀

Hello,

I was wondering if I could host a CodoForum site locally using XAMPP, can I then upload the site to Github pages?

Thanks!
~ Squiddy

(Sorry for re-posting this question twice)

Think about a hypothetical situation; and post a question using the structure "What would you do if....? " Then, read your classmates posts and answer their questions.

PS. Remember to use the structure of the 2nd conditional.

E.g. What would you do if you found 5 million pesos in a public restroom?

When I try to access the forum in my VM, the below error is shown at every webpage I attempt to enter.

Fatal error: Uncaught PDOException: PDO::__construct(): php_network_getaddresses: getaddrinfo failed: Temporary failure in name resolution in /var/www/codoforum/sys/vendor/illuminate/database/Illuminate/Database/Connectors/Connector.php:47 Stack trace: #0 /var/www/codoforum/sys/vendor/illuminate/database/Illuminate/Database/Connectors/Connector.php(47): PDO->__construct() #1 /var/www/codoforum/sys/vendor/illuminate/database/Illuminate/Database/Connectors/MySqlConnector.php(20): Illuminate\Database\Connectors\Connector->createConnection() #2 /var/www/codoforum/sys/vendor/illuminate/database/Illuminate/Database/Connectors/ConnectionFactory.php(57): Illuminate\Database\Connectors\MySqlConnector->connect() #3 /var/www/codoforum/sys/vendor/illuminate/database/Illuminate/Database/Connectors/ConnectionFactory.php(46): Illuminate\Database\Connectors\ConnectionFactory->createSingleConnection() #4 /var/www/codoforum/sys/vendor/illuminate/database/Illuminate/Database/DatabaseManager.php(176): Illuminate\Database\Connectors\Connectio in /var/www/codoforum/sys/vendor/illuminate/database/Illuminate/Database/Connectors/Connector.php on line 47

I haven't made any changes to the forum prior to getting this error and I am not sure what may be causing this issue.

Hallo @admin and @adesh

I just want to let you know that the link here in the forum navigation to the FreiChat documentation is dead:

The requested URL /docs/doku.php?id=wiki:freichat:index was not found on this server.

Kind regards, WebCrew

Hi, can you tell me more about this site?

Hello,

Is it possible to remove the New Post section or enable it only for users with permissions?

Thanks in advance

kodoforumu indiremiyorum

Uyarı: session_start(): Oturum nesnesinin kodu çözülemedi. Oturum 93. satırda C:\xampp\htdocs\forum\sys\CODOF\Util.php dosyasında yok edildi

Ayrıştırma hatası: sözdizimi hatası, beklenmeyen simge "*", 2. satırda C:\xampp\htdocs\forum\cache\HB\compiled\57397fb48242849719080522fa095531.php içindeki dosyanın sonu bekleniyor

Changes did not reflect after change in index.php

<?php
 date_default_timezone_set('Asia/Calcutta');

// Site Name & Title VISNI SERVICES
 define('SITE_NAME','VISNI SERVICES');
 define('SITE_TITLE','VISNI SERVICES');
 // Site Path ...
 define('SITE_PATH',$_SERVER['DOCUMENT_ROOT'].'/visni');
 define('ADMIN_PATH',SITE_PATH.'/admin');
 define('CSS_PATH',SITE_PATH.'/css');
 define('PHP_PATH',SITE_PATH.'/php');
 define('JS_PATH',SITE_PATH.'/js');
 define('IMAGES_PATH',SITE_PATH.'/images');
 define('INC_PATH',SITE_PATH.'/inc');
 define('LIB_PATH',SITE_PATH.'/lib');


// Site URL's ...

 define('ADMIN_URL',SITE_URL.'/admin');
 define('CSS_URL',SITE_URL.'/css');
 define('FONT_URL',SITE_URL.'/fonts');
 define('PHP_URL',SITE_URL.'/php');
 define('JS_URL',SITE_URL.'/js');
 define('IMAGES_URL',SITE_URL.'/images');
 define('INC_URL',SITE_URL.'/inc');
 define('LIB_URL',SITE_URL.'/lib');
 //echo JS_URL;


 // Database Connections Do not Modify Below....
 define('DB_HOST','localhost');
 define('DB_USER','root');
 define('DB_PWD','');
define('DB_NAME','');
define('DB_TYPE','');
?>

Like the title says; My images downloading when clicked rather than showing the full image. I get this dialog box;

I assume it's a privilege issue but can't figure it out, thanks to whoever can help me out.

Hi,
Today I installed codoforum, but it is showing HTML tags in the received emails as shown in screenshot. I have tried to switch between SMTP & mail() but it was not helpful.

Please help me to resolve the problem

Hello...
At the moment I'm very frustrated by the lack of documentation in codoforum. Out of the box I had the struggle of getting freichat to work and by accident I found out there was a bug in one of the installer files which just doesn't seem to get rectified (If I would distribute software I would take these errors out! So they're not in there on download for new adapters).
Now I'm completely stuck on the uni_login... I managed to get google to work but thats it. And to be honest I don't have the time energy and willpower to go through the process of debugging and searching endlessly for a solution... THESE ARE out of the box plugins. There is no guide or anything anything about this except for google. All documentation or posts I can find are either incomplete or simply wrong. When there is an answer from codoforum they assume you now every file by heart and are in their head or something. To get the point is there anywhere a guide to implement facebook and twitter login. The problem with facebook is that it goes to the facebook page asks me to login and then simply return to the login page on the forum like nothing ha happened. I tried everything with redirect url's and I can't get it to work! With twitter again the normal install procedure is just wrong if I put the callback URL into twitter it says that queries are not allowed. This is a copy and a paste from YOUR documentation. Is there anything else I can try or should I just wipe the domains I put this on and switch to Vanilla or something where I can find how to implement stuff? (Again out of the box not 8 hours+ of googling and tearing my hair out)? Thanks in advance

What is the third icon on the right? Views, replies and...?

Thanks